The index below is the whole range on one page. Each entry names the governing standard first, because in fire testing the standard - not the brochure - decides which instrument you need. If your specification names a standard you cannot find here, send it through the contact page: the wider range covers more configurations than this index lists individually.
Cone Calorimeter
Heat release rate by oxygen consumption; the bench-scale reference instrument.
Mass Loss Calorimeter
Heat release derived from continuous mass loss under a cone heater.
Microscale Combustion Calorimeter
Milligram-scale heat release capacity for material screening (MCC-3).
OSU Heat Release Apparatus
Aircraft cabin material heat release qualification.
UL 9540A Heat Release Calorimetry
Cell and unit level thermal runaway heat release measurement.
Bomb Calorimeter
Gross heat of combustion (PCS) for classification evidence.
Oxygen Index Tester
Limiting oxygen index; COI paramagnetic and AOI automatic models.
Auto-Ignition & Flammability Limit Tester
LFL/UFL and auto-ignition temperature for gases and vapours.
NBS Smoke Density Chamber
Specific optical density of smoke, flaming and non-flaming (SDB).
Smoke Density Tester
3-metre cube for cables and D2843 chamber for materials.
Smoke Toxicity FTIR System
Quantitative fire gas analysis coupled to chambers and calorimeters.
UL 94 Flame Chamber
50 W and 500 W horizontal/vertical flame tests (UL94-X).
Glow Wire Tester
GWFI, GWIT and end-product glow-wire testing at 550-960 °C.
Needle Flame Tester
12 mm small-flame ignition testing for components and materials.
Single Burning Item (SBI)
FIGRA and SMOGRA for EN 13501-1 Euroclasses; full room installation.
Single Flame Source Test
Small-flame ignitability behind Euroclass E (SIT).
Non-Combustibility Furnace
750 °C furnace behind class A1 decisions (NCF).
Steiner Tunnel
Flame spread and smoke developed indices; plenum cable configuration.
Flooring Radiant Panel
Critical radiant flux for floor coverings.
Flame Spread & Room Corner
Surface spread of flame panels and the full-scale room/corner test.
Fire Resistance Furnace
Full-element fire resistance testing on the standard curve.
Indicative Fire Resistance Furnace
1.0-1.5 m screening furnace for development comparisons.
Bunched Cable Flame Test
Bundle flame spread and CPR measurement configuration.
Cable Fire Resistance Tester
Circuit integrity of energised cables under fire.
Thermal Protective Performance Tester
TPP rating of protective fabric composites, with RPP/HTI/CHT range.
PPE Fire Test Equipment
Flame manikin, mask, helmet/glove and molten-metal splash rigs.
Roofing Fire Test Apparatus
External fire exposure of roofs, Test 3 and Test 4.
Mattress Fire Test
Full-scale open-flame mattress set testing for the US rule.
Automotive Flammability Tester
Horizontal burn rate of vehicle interior materials.
FAA Oil Burner Series
NexGen burner tests: seat, insulation, cargo liner, powerplant.
Fire Propagation Apparatus
Fire propagation index for linings under the UK system.